Liugong 908C Aftermarket Hydraulic Final Drive Motor

compatible pipe schedule:40; bearing type:Roll End Plain Beari; compatible pipe size:4 in; bearing material:POM; B:1-3/4 in; maximum pv value:3000; bore size:1 in; outside diameter design:Straight; material specification:Delrin, Celcon; operating temperature range:Maximum of +225;

closure type:Open; B:3/4 in; bearing type:Roll End Plain Beari; operating temperature range:Maximum of +225; compatible tubing gauge:18 ga; bearing material:Moly-Filled Nylon; maximum pv value:4000; compatible tubing outside diameter:1-3/8 in; bearing outside diameter:1.277 in; bore s

rod end type:Male Threaded; head width:1.000 in; d:1.0000 in; lubrication:Self Lubricating; lubrication type:Maintenance Free housing material:Carbon Steel - Corro; thread direction:Left Hand; shank thread size:1 1/4-12; ball width:1.375 in; head diameter:2.750 in;

thread direction:Left Hand; head width:0.750 in; shank thread length:1.625 in; lubrication type:No Fitting; ball material:52100 Bearing Steel; shank thread size:5/8 - 18 in; rod end type:Male Threaded; race material:Bronze; standards met:SAEJ1120; length to ball center:2.625 in;

internal clearance:C3; snap ring included:Without Snap Ring; bore type:Round; cage material:Steel; d:30 mm; outer ring width:13 mm; B:13 mm; inner ring width:13 mm; D:55 mm; precision rating:ABEC 1;

finish/coating:Uncoated; housing material:Cast Iron; series:STMH-T; overall length:5-1/16 in; rod hole diameter:7/8 in; seal type:Contact with Flinger; slot width:0.5313 in; d:1.2500 in; operating temperature range:-20 to +200 &de; overall height:4 in;

locking device:Set Screw; radial static load capacity:10000 lb; bore type:Round; maximum rpm:4950 RPM; overall height:6.8125 in; overall length:12.6250 in; radial dynamic load capacity:10000 lb; mounting:Two-Bolt Base; base width:3-3/8 in; D:10-1/4 in;